/*!* * * Copyright (c) Highsoft AS. All rights reserved. * *!*/ import * as Highcharts from "../highcharts.src"; declare module "../highcharts.src" { /** * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial * animation when a series is displayed for the `dataLabels`. The animation * can also be set as a configuration object. Please note that this option * only applies to the initial animation. * * For other animations, see chart.animation and the animation parameter * under the API methods. The following properties are supported: * * - `defer`: The animation delay time in milliseconds. */ interface PlotVariwideDataLabelsAnimationOptions { /** * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in * milliseconds. Set to `0` to render the data labels immediately. As * `undefined` inherits defer time from the series.animation.defer. */ defer?: number; } /** * (Highcharts, Highstock) Options for the series data sorting. */ interface PlotVariwideDataSortingOptions { /** * (Highcharts, Highstock) Enable or disable data sorting for the * series. Use xAxis.reversed to change the sorting order. */ enabled?: boolean; /** * (Highcharts, Highstock) Whether to allow matching points by name in * an update. If this option is disabled, points will be matched by * order. */ matchByName?: boolean; /** * (Highcharts, Highstock) Determines what data value should be used to * sort by. */ sortKey?: string; } /** * (Highcharts) Options for the _Series on point_ feature. Only `pie` and * `sunburst` series are supported at this moment. */ interface PlotVariwideOnPointOptions { /** * (Highcharts) Options for the connector in the _Series on point_ * feature. * * In styled mode, the connector can be styled with the * `.highcharts-connector-seriesonpoint` class name. */ connectorOptions?: (Highcharts.PlotVariwideOnPointConnectorOptions|Highcharts.SVGAttributes); /** * (Highcharts) The `id` of the point that we connect the series to. * Only points with a given `plotX` and `plotY` values and map points * are valid. */ id?: string; /** * (Highcharts) Options allowing to set a position and an offset of the * series in the _Series on point_ feature. */ position?: (object|Highcharts.PlotVariwideOnPointPositionOptions); } /** * (Highcharts) A variwide chart (related to marimekko chart) is a column * chart with a variable width expressing a third dimension. * * In TypeScript the type option must always be set. * * Configuration options for the series are given in three levels: * * 1. Options for all series in a chart are defined in the * plotOptions.series object. * * 2. Options for all `variwide` series are defined in plotOptions.variwide. * * 3. Options for one single series are given in the series instance array. * (see online documentation for example) */ interface PlotVariwideOptions { /** * (Highcharts) Accessibility options for a series. */ accessibility?: Highcharts.SeriesAccessibilityOptionsObject; /** * (Highcharts) Allow this series' points to be selected by clicking on * the graphic (columns, point markers, pie slices, map areas etc). * * The selected points can be handled by point select and unselect * events, or collectively by the getSelectedPoints function. * * And alternative way of selecting points is through dragging. */ allowPointSelect?: boolean; /** * (Highcharts) Enable or disable the initial animation when a series is * displayed. The animation can also be set as a configuration object. * Please note that this option only applies to the initial animation of * the series itself. For other animations, see chart.animation and the * animation parameter under the API methods. The following properties * are supported: * * - `defer`: The animation delay time in milliseconds. * * - `duration`: The duration of the animation in milliseconds. * (Defaults to `1000`) * * - `easing`: Can be a string reference to an easing function set on * the `Math` object or a function. See the _Custom easing function_ * demo below. (Defaults to `easeInOutSine`) * * Due to poor performance, animation is disabled in old IE browsers for * several chart types. */ animation?: (boolean|Highcharts.AnimationOptionsObject); /** * (Highcharts) For some series, there is a limit that shuts down * animation by default when the total number of points in the chart is * too high. For example, for a column chart and its derivatives, * animation does not run if there is more than 250 points totally. To * disable this cap, set `animationLimit` to `Infinity`. This option * works if animation is fired on individual points, not on a group of * points like e.g. during the initial animation. */ animationLimit?: number; /** * (Highcharts, Highstock, Gantt) The color of the border surrounding * each column or bar. * * In styled mode, the border stroke can be set with the * `.highcharts-point` rule. */ borderColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject); /** * (Highcharts, Highstock, Gantt) The corner radius of the border * surrounding each column or bar. A number signifies pixels. A * percentage string, like for example `50%`, signifies a relative size. * For columns this is relative to the column width, for pies it is * relative to the radius and the inner radius. */ borderRadius?: (number|string|Highcharts.BorderRadiusOptionsObject); /** * (Highcharts, Highstock, Gantt) The width of the border surrounding * each column or bar. Defaults to `1` when there is room for a border, * but to `0` when the columns are so dense that a border would cover * the next column. * * In styled mode, the stroke width can be set with the * `.highcharts-point` rule. */ borderWidth?: number; /** * (Highcharts, Highstock, Gantt) When `true`, the columns will center * in the category, ignoring null or missing points. When `false`, space * will be reserved for null or missing points. */ centerInCategory?: boolean; /** * (Highcharts) An additional class name to apply to the series' * graphical elements. This option does not replace default class names * of the graphical element. Changes to the series' color will also be * reflected in a chart's legend and tooltip. */ className?: string; /** * (Highcharts) Disable this option to allow series rendering in the * whole plotting area. * * **Note:** Clipping should be always enabled when chart.zoomType is * set */ clip?: boolean; /** * (Highcharts) The main color of the series. In line type series it * applies to the line and the point markers unless otherwise specified. * In bar type series it applies to the bars unless a color is specified * per point. The default value is pulled from the `options.colors` * array. * * In styled mode, the color can be defined by the colorIndex option. * Also, the series color can be set with the `.highcharts-series`, * `.highcharts-color-{n}`, `.highcharts-{type}-series` or * `.highcharts-series-{n}` class, or individual classes given by the * `className` option. */ color?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject); /** * (Highcharts, Highstock, Highmaps) When using dual or multiple color * axes, this number defines which colorAxis the particular series is * connected to. It refers to either the axis id or the index of the * axis in the colorAxis array, with 0 being the first. Set this option * to false to prevent a series from connecting to the default color * axis. * * Since v7.2.0 the option can also be an axis id or an axis index * instead of a boolean flag. */ colorAxis?: (boolean|number|string); /** * (Highcharts, Highstock, Gantt) When using automatic point colors * pulled from the global colors or series-specific * plotOptions.column.colors collections, this option determines whether * the chart should receive one color per series or one color per point. * * In styled mode, the `colors` or `series.colors` arrays are not * supported, and instead this option gives the points individual color * class names on the form `highcharts-color-{n}`. */ colorByPoint?: boolean; /** * (Highcharts) Styled mode only. A specific color index to use for the * series, so its graphic representations are given the class name * `highcharts-color-{n}`. * * Since v11, CSS variables on the form `--highcharts-color-{n}` make * changing the color scheme very convenient. */ colorIndex?: number; /** * (Highcharts, Highstock, Highmaps) Determines what data value should * be used to calculate point color if `colorAxis` is used. Requires to * set `min` and `max` if some custom point property is used or if * approximation for data grouping is set to `'sum'`. */ colorKey?: string; /** * (Highcharts, Highstock, Gantt) A series specific or series type * specific color set to apply instead of the global colors when * colorByPoint is true. */ colors?: Array<(Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject)>; /** * (Highcharts, Highstock, Gantt) When the series contains less points * than the crop threshold, all points are drawn, event if the points * fall outside the visible plot area at the current zoom. The advantage * of drawing all points (including markers and columns), is that * animation is performed on updates. On the other hand, when the series * contains more points than the crop threshold, the series data is * cropped to only contain points that fall within the plot area. The * advantage of cropping away invisible points is to increase * performance on large series. */ cropThreshold?: number; /** * (Highcharts) You can set the cursor to "pointer" if you have click * events attached to the series, to signal to the user that the points * and lines can be clicked. * * In styled mode, the series cursor can be set with the same classes as * listed under series.color. */ cursor?: (string|Highcharts.CursorValue); /** * (Highcharts) A reserved subspace to store options and values for * customized functionality. Here you can add additional data for your * own event callbacks and formatter callbacks. */ custom?: Highcharts.Dictionary; /** * (Highcharts) Name of the dash style to use for the graph, or for some * series types the outline of each shape. * * In styled mode, the stroke dash-array can be set with the same * classes as listed under series.color. */ dashStyle?: Highcharts.DashStyleValue; /** * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data * labels, appearing next to each data point. * * Since v6.2.0, multiple data labels can be applied to each single * point by defining them as an array of configs. * * In styled mode, the data labels can be styled with the * `.highcharts-data-label-box` and `.highcharts-data-label` class names * (see example). */ dataLabels?: (Highcharts.PlotVariwideDataLabelsOptions|Array); /** * (Highcharts, Highstock) Options for the series data sorting. */ dataSorting?: (Highcharts.DataSortingOptionsObject|Highcharts.PlotVariwideDataSortingOptions); /** * (Highcharts) A description of the series to add to the screen reader * information about the series. */ description?: string; /** * (Highcharts) The draggable-points module allows points to be moved * around or modified in the chart. In addition to the options mentioned * under the `dragDrop` API structure, the module fires three events, * point.dragStart, point.drag and point.drop. */ dragDrop?: Highcharts.SeriesDragDropOptionsObject; /** * (Highcharts) Enable or disable the mouse tracking for a specific * series. This includes point tooltips and click events on graphs and * points. For large datasets it improves performance. */ enableMouseTracking?: boolean; /** * (Highcharts) General event handlers for the series items. These event * hooks can also be attached to the series at run time using the * `Highcharts.addEvent` function. */ events?: Highcharts.SeriesEventsOptionsObject; /** * (Highcharts) Determines whether the series should look for the * nearest point in both dimensions or just the x-dimension when * hovering the series. Defaults to `'xy'` for scatter series and `'x'` * for most other series. If the data has duplicate x-values, it is * recommended to set this to `'xy'` to allow hovering over all points. * * Applies only to series types using nearest neighbor search (not * direct hover) for tooltip. */ findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue; /** * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the * total chart width or only the zoomed area when zooming in on parts of * the X axis. By default, the Y axis adjusts to the min and max of the * visible data. Cartesian series only. */ getExtremesFromAll?: boolean; /** * (Highcharts, Highstock, Gantt) Whether to group non-stacked columns * or to let them render independent of each other. Non-grouped columns * will be laid out individually and overlap each other. */ grouping?: boolean; /** * (Highcharts, Highstock, Gantt) In a variwide chart, the group padding * is 0 in order to express the horizontal stacking of items. */ groupPadding?: number; /** * (Highcharts) Highlight only the hovered point and fade the remaining * points. * * Scatter-type series require enabling the 'inactive' marker state and * adjusting opacity. Note that this approach could affect performance * with large datasets. */ inactiveOtherPoints?: boolean; /** * (Highcharts) When set to `false` will prevent the series data from * being included in any form of data export. * * Since version 6.0.0 until 7.1.0 the option was existing undocumented * as `includeInCSVExport`. */ includeInDataExport?: boolean; /** * (Highcharts) An array specifying which option maps to which key in * the data point array. This makes it convenient to work with * unstructured data arrays from different sources. */ keys?: Array; /** * (Highcharts, Highstock, Gantt) Series labels are placed as close to * the series as possible in a natural way, seeking to avoid other * series. The goal of this feature is to make the chart more easily * readable, like if a human designer placed the labels in the optimal * position. * * The series labels currently work with series types having a `graph` * or an `area`. */ label?: Highcharts.SeriesLabelOptionsObject; /** * (Highcharts) What type of legend symbol to render for this series. * Can be one of `areaMarker`, `lineMarker` or `rectangle`. */ legendSymbol?: Highcharts.OptionsLegendSymbolValue; /** * (Highcharts, Highstock, Gantt) The id of another series to link to. * Additionally, the value can be ":previous" to link to the previous * series. When two series are linked, only the first one appears in the * legend. Toggling the visibility of this also toggles the linked * series. * * If master series uses data sorting and linked series does not have * its own sorting definition, the linked series will be sorted in the * same order as the master one. */ linkedTo?: string; /** * (Highcharts, Highstock, Gantt) The maximum allowed pixel width for a * column, translated to the height of a bar in a bar chart. This * prevents the columns from becoming too wide when there is a small * number of points in the chart. */ maxPointWidth?: number; /** * (Highcharts, Highstock, Gantt) The minimal height for a column or * width for a bar. By default, 0 values are not shown. To visualize a 0 * (or close to zero) point, set the minimal point length to a pixel * value like 3\. In stacked column charts, minPointLength might not be * respected for tightly packed values. */ minPointLength?: number; /** * (Highcharts) The color for the parts of the graph or points that are * below the threshold. Note that `zones` takes precedence over the * negative color. Using `negativeColor` is equivalent to applying a * zone with value of 0. */ negativeColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject); /** * (Highcharts) Options for the _Series on point_ feature. Only `pie` * and `sunburst` series are supported at this moment. */ onPoint?: (object|Highcharts.PlotVariwideOnPointOptions); /** * (Highcharts) Opacity of a series parts: line, fill (e.g. area) and * dataLabels. */ opacity?: number; /** * (Highcharts) Properties for each single point. */ point?: Highcharts.PlotSeriesPointOptions; /** * (Highcharts) Same as accessibility.point.descriptionFormat, but for * an individual series. Overrides the chart wide configuration. */ pointDescriptionFormat?: Function; /** * (Highcharts) Same as accessibility.series.descriptionFormatter, but * for an individual series. Overrides the chart wide configuration. */ pointDescriptionFormatter?: Function; /** * (Highcharts, Highstock, Gantt) If no x values are given for the * points in a series, `pointInterval` defines the interval of the x * values. For example, if a series contains one value every decade * starting from year 0, set `pointInterval` to `10`. In true `datetime` * axes, the `pointInterval` is set in milliseconds. * * It can be also be combined with `pointIntervalUnit` to draw irregular * time intervals. * * If combined with `relativeXValue`, an x value can be set on each * point, and the `pointInterval` is added x times to the `pointStart` * setting. * * Please note that this options applies to the _series data_, not the * interval of the axis ticks, which is independent. */ pointInterval?: number; /** * (Highcharts, Highstock, Gantt) On datetime series, this allows for * setting the pointInterval to irregular time units, `day`, `month` and * `year`. A day is usually the same as 24 hours, but * `pointIntervalUnit` also takes the DST crossover into consideration * when dealing with local time. Combine this option with * `pointInterval` to draw weeks, quarters, 6 months, 10 years etc. * * Please note that this options applies to the _series data_, not the * interval of the axis ticks, which is independent. */ pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue; /** * (Highcharts, Highstock, Gantt) In a variwide chart, the point padding * is 0 in order to express the horizontal stacking of items. */ pointPadding?: number; /** * (Highcharts, Highstock, Gantt) Possible values: `"on"`, `"between"`, * `number`. * * In a column chart, when pointPlacement is `"on"`, the point will not * create any padding of the X axis. In a polar column chart this means * that the first column points directly north. If the pointPlacement is * `"between"`, the columns will be laid out between ticks. This is * useful for example for visualising an amount between two points in * time or in a certain sector of a polar chart. * * Since Highcharts 3.0.2, the point placement can also be numeric, * where 0 is on the axis value, -0.5 is between this value and the * previous, and 0.5 is between this value and the next. Unlike the * textual options, numeric point placement options won't affect axis * padding. * * Note that pointPlacement needs a pointRange to work. For column * series this is computed, but for line-type series it needs to be set. * * For the `xrange` series type and gantt charts, if the Y axis is a * category axis, the `pointPlacement` applies to the Y axis rather than * the (typically datetime) X axis. * * Defaults to `undefined` in cartesian charts, `"between"` in polar * charts. */ pointPlacement?: (number|string); /** * (Highcharts, Highstock, Gantt) The X axis range that each point is * valid for. This determines the width of the column. On a categorized * axis, the range will be 1 by default (one category unit). On linear * and datetime axes, the range will be computed as the distance between * the two closest data points. * * The default `null` means it is computed automatically, but this * option can be used to override the automatic value. * * This option is set by default to 1 if data sorting is enabled. */ pointRange?: (number|null); /** * (Highcharts, Highstock, Gantt) If no x values are given for the * points in a series, pointStart defines on what value to start. For * example, if a series contains one yearly value starting from 1945, * set pointStart to 1945. * * If combined with `relativeXValue`, an x value can be set on each * point. The x value from the point options is multiplied by * `pointInterval` and added to `pointStart` to produce a modified x * value. */ pointStart?: number; /** * (Highcharts, Highstock, Gantt) A pixel value specifying a fixed width * for each column or bar point. When set to `undefined`, the width is * calculated from the `pointPadding` and `groupPadding`. The width * effects the dimension that is not based on the point value. For * column series it is the horizontal length and for bar series it is * the vertical length. */ pointWidth?: number; /** * (Highcharts, Highstock) When true, X values in the data set are * relative to the current `pointStart`, `pointInterval` and * `pointIntervalUnit` settings. This allows compression of the data for * datasets with irregular X values. * * The real X values are computed on the formula `f(x) = ax + b`, where * `a` is the `pointInterval` (optionally with a time unit given by * `pointIntervalUnit`), and `b` is the `pointStart`. */ relativeXValue?: boolean; /** * (Highcharts) Whether to select the series initially. If * `showCheckbox` is true, the checkbox next to the series name in the * legend will be checked for a selected series. */ selected?: boolean; /** * (Highcharts) Whether to apply a drop shadow to the graph line. Since * 2.3 the shadow can be an object configuration containing `color`, * `offsetX`, `offsetY`, `opacity` and `width`. * * Note that in some cases, like stacked columns or other dense layouts, * the series may cast shadows on each other. In that case, the * `chart.seriesGroupShadow` allows applying a common drop shadow to the * whole series group. */ shadow?: (boolean|Highcharts.ShadowOptionsObject); /** * (Highcharts) If true, a checkbox is displayed next to the legend item * to allow selecting the series. The state of the checkbox is * determined by the `selected` option. */ showCheckbox?: boolean; /** * (Highcharts) Whether to display this particular series or series type * in the legend. Standalone series are shown in legend by default, and * linked series are not. Since v7.2.0 it is possible to show series * that use colorAxis by setting this option to `true`. */ showInLegend?: boolean; /** * (Highcharts) If set to `true`, the accessibility module will skip * past the points in this series for keyboard navigation. */ skipKeyboardNavigation?: boolean; /** * (Highcharts, Highstock) When this is true, the series will not cause * the Y axis to cross the zero plane (or threshold option) unless the * data actually crosses the plane. * * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3 * will make the Y axis show negative values according to the * `minPadding` option. If `softThreshold` is `true`, the Y axis starts * at 0. */ softThreshold?: boolean; /** * (Highcharts) Sonification/audio chart options for a series. */ sonification?: Highcharts.SeriesSonificationOptions; /** * (Highcharts, Highstock) Whether to stack the values of each series on * top of each other. Possible values are `undefined` to disable, * `"normal"` to stack by value or `"percent"`. * * When stacking is enabled, data must be sorted in ascending X order. * * Some stacking options are related to specific series types. In the * streamgraph series type, the stacking option is set to `"stream"`. * The second one is `"overlap"`, which only applies to waterfall * series. */ stacking?: Highcharts.OptionsStackingValue; states?: Highcharts.SeriesStatesOptionsObject; /** * (Highcharts) Sticky tracking of mouse events. When true, the * `mouseOut` event on a series isn't triggered until the mouse moves * over another series, or out of the plot area. When false, the * `mouseOut` event on a series is triggered when the mouse leaves the * area around the series' graph or markers. This also implies the * tooltip when not shared. When `stickyTracking` is false and * `tooltip.shared` is false, the tooltip will be hidden when moving the * mouse between series. Defaults to true for line and area type series, * but to false for columns, pies etc. * * **Note:** The boost module will force this option because of * technical limitations. */ stickyTracking?: boolean; /** * (Highcharts) The Y axis value to serve as the base for the columns, * for distinguishing between values above and below a threshold. If * `null`, the columns extend from the padding Y axis minimum. */ threshold?: (number|null); /** * (Highcharts) A configuration object for the tooltip rendering of each * single series. Properties are inherited from tooltip, but only the * following properties can be defined on a series level. */ tooltip?: Highcharts.SeriesTooltipOptionsObject; /** * (Highcharts, Highstock, Gantt) When a series contains a data array * that is longer than this, only one dimensional arrays of numbers, or * two dimensional arrays with x and y values are allowed. Also, only * the first point is tested, and the rest are assumed to be the same * format. This saves expensive data checking and indexing in long * series. Set it to `0` disable. * * Note: In boost mode turbo threshold is forced. Only array of numbers * or two dimensional arrays are allowed. */ turboThreshold?: number; /** * (Highcharts) Set the initial visibility of the series. */ visible?: boolean; /** * (Highcharts, Highstock) Defines the Axis on which the zones are * applied. */ zoneAxis?: string; /** * (Highcharts, Highstock) An array defining zones within a series. * Zones can be applied to the X axis, Y axis or Z axis for bubbles, * according to the `zoneAxis` option. The zone definitions have to be * in ascending order regarding to the value. * * In styled mode, the color zones are styled with the * `.highcharts-zone-{n}` class, or custom classed from the `className` * option (view live demo). */ zones?: Array; } /** * (Highcharts) A `variwide` series. If the type option is not specified, it * is inherited from chart.type. * * In TypeScript the type option must always be set. * * Configuration options for the series are given in three levels: * * 1. Options for all series in a chart are defined in the * plotOptions.series object. * * 2. Options for all `variwide` series are defined in plotOptions.variwide. * * 3. Options for one single series are given in the series instance array. * (see online documentation for example) * * You have to extend the `SeriesVariwideOptions` via an interface to allow * custom properties: ``` declare interface SeriesVariwideOptions { * customProperty: string; } * */ interface SeriesVariwideOptions extends Highcharts.PlotVariwideOptions, Highcharts.SeriesOptions { /** * (Highcharts) An array of data points for the series. For the * `variwide` series type, points can be given in the following ways: * * 1. An array of arrays with 3 or 2 values. In this case, the values * correspond to `x,y,z`. If the first value is a string, it is applied * as the name of the point, and the `x` value is inferred. The `x` * value can also be omitted, in which case the inner arrays should be * of length 2. Then the `x` value is automatically calculated, either * starting at 0 and incremented by 1, or from `pointStart` and * `pointInterval` given in the series options. (see online * documentation for example) * * 2. An array of objects with named values. The following snippet shows * only a few settings, see the complete options set below. If the total * number of data points exceeds the series' turboThreshold, this option * is not available. (see online documentation for example) */ data?: Array<([(number|string), number]|[(number|string), number, number]|Highcharts.PointOptionsObject)>; /** * (Highcharts, Highstock, Highmaps, Gantt) This property is only in * TypeScript non-optional and might be `undefined` in series objects * from unknown sources. */ type: "variwide"; } }