/*!* * * Copyright (c) Highsoft AS. All rights reserved. * *!*/ import * as Highcharts from "../highcharts.src"; declare module "../highcharts.src" { /** * (Highcharts, Highstock, Gantt) The corner radius of the border * surrounding each column or bar. A number signifies pixels. A percentage * string, like for example `50%`, signifies a relative size. For columns * this is relative to the column width, for pies it is relative to the * radius and the inner radius. */ interface PlotColumnrangeBorderRadiusOptions { where?: string; } /** * (Highcharts, Highstock) Options for the series data sorting. */ interface PlotColumnrangeDataSortingOptions { /** * (Highcharts, Highstock) Enable or disable data sorting for the * series. Use xAxis.reversed to change the sorting order. */ enabled?: boolean; /** * (Highcharts, Highstock) Whether to allow matching points by name in * an update. If this option is disabled, points will be matched by * order. */ matchByName?: boolean; /** * (Highcharts, Highstock) Determines what data value should be used to * sort by. */ sortKey?: string; } /** * (Highcharts, Highstock) Options for the _Series on point_ feature. Only * `pie` and `sunburst` series are supported at this moment. */ interface PlotColumnrangeOnPointOptions { /** * (Highcharts, Highstock) Options for the connector in the _Series on * point_ feature. * * In styled mode, the connector can be styled with the * `.highcharts-connector-seriesonpoint` class name. */ connectorOptions?: (Highcharts.PlotColumnrangeOnPointConnectorOptions|Highcharts.SVGAttributes); /** * (Highcharts, Highstock) The `id` of the point that we connect the * series to. Only points with a given `plotX` and `plotY` values and * map points are valid. */ id?: string; /** * (Highcharts, Highstock) Options allowing to set a position and an * offset of the series in the _Series on point_ feature. */ position?: (object|Highcharts.PlotColumnrangeOnPointPositionOptions); } /** * (Highcharts, Highstock) The column range is a cartesian series type with * higher and lower Y values along an X axis. To display horizontal bars, * set chart.inverted to `true`. * * In TypeScript the type option must always be set. * * Configuration options for the series are given in three levels: * * 1. Options for all series in a chart are defined in the * plotOptions.series object. * * 2. Options for all `columnrange` series are defined in * plotOptions.columnrange. * * 3. Options for one single series are given in the series instance array. * (see online documentation for example) */ interface PlotColumnrangeOptions { /** * (Highcharts, Highstock) Accessibility options for a series. */ accessibility?: Highcharts.SeriesAccessibilityOptionsObject; /** * (Highcharts, Highstock) Allow this series' points to be selected by * clicking on the graphic (columns, point markers, pie slices, map * areas etc). * * The selected points can be handled by point select and unselect * events, or collectively by the getSelectedPoints function. * * And alternative way of selecting points is through dragging. */ allowPointSelect?: boolean; /** * (Highcharts, Highstock) Enable or disable the initial animation when * a series is displayed. The animation can also be set as a * configuration object. Please note that this option only applies to * the initial animation of the series itself. For other animations, see * chart.animation and the animation parameter under the API methods. * The following properties are supported: * * - `defer`: The animation delay time in milliseconds. * * - `duration`: The duration of the animation in milliseconds. * (Defaults to `1000`) * * - `easing`: Can be a string reference to an easing function set on * the `Math` object or a function. See the _Custom easing function_ * demo below. (Defaults to `easeInOutSine`) * * Due to poor performance, animation is disabled in old IE browsers for * several chart types. */ animation?: (boolean|Highcharts.AnimationOptionsObject); /** * (Highcharts, Highstock) For some series, there is a limit that shuts * down animation by default when the total number of points in the * chart is too high. For example, for a column chart and its * derivatives, animation does not run if there is more than 250 points * totally. To disable this cap, set `animationLimit` to `Infinity`. * This option works if animation is fired on individual points, not on * a group of points like e.g. during the initial animation. */ animationLimit?: number; /** * (Highcharts, Highstock) Sets the color blending in the boost module. */ boostBlending?: Highcharts.OptionsBoostBlendingValue; /** * (Highcharts, Highstock) Set the point threshold for when a series * should enter boost mode. * * Setting it to e.g. 2000 will cause the series to enter boost mode * when there are 2000 or more points in the series. * * To disable boosting on the series, set the `boostThreshold` to 0. * Setting it to 1 will force boosting. * * Note that the cropThreshold also affects this setting. When zooming * in on a series that has fewer points than the `cropThreshold`, all * points are rendered although outside the visible plot area, and the * `boostThreshold` won't take effect. */ boostThreshold?: number; /** * (Highcharts, Highstock, Gantt) The color of the border surrounding * each column or bar. * * In styled mode, the border stroke can be set with the * `.highcharts-point` rule. */ borderColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject); /** * (Highcharts, Highstock, Gantt) The corner radius of the border * surrounding each column or bar. A number signifies pixels. A * percentage string, like for example `50%`, signifies a relative size. * For columns this is relative to the column width, for pies it is * relative to the radius and the inner radius. */ borderRadius?: (number|string|Highcharts.BorderRadiusOptionsObject|Highcharts.PlotColumnrangeBorderRadiusOptions); /** * (Highcharts, Highstock, Gantt) The width of the border surrounding * each column or bar. Defaults to `1` when there is room for a border, * but to `0` when the columns are so dense that a border would cover * the next column. * * In styled mode, the stroke width can be set with the * `.highcharts-point` rule. */ borderWidth?: number; /** * (Highcharts, Highstock, Gantt) When `true`, the columns will center * in the category, ignoring null or missing points. When `false`, space * will be reserved for null or missing points. */ centerInCategory?: boolean; /** * (Highcharts, Highstock) An additional class name to apply to the * series' graphical elements. This option does not replace default * class names of the graphical element. Changes to the series' color * will also be reflected in a chart's legend and tooltip. */ className?: string; /** * (Highcharts, Highstock) Disable this option to allow series rendering * in the whole plotting area. * * **Note:** Clipping should be always enabled when chart.zoomType is * set */ clip?: boolean; /** * (Highcharts, Highstock) The main color of the series. In line type * series it applies to the line and the point markers unless otherwise * specified. In bar type series it applies to the bars unless a color * is specified per point. The default value is pulled from the * `options.colors` array. * * In styled mode, the color can be defined by the colorIndex option. * Also, the series color can be set with the `.highcharts-series`, * `.highcharts-color-{n}`, `.highcharts-{type}-series` or * `.highcharts-series-{n}` class, or individual classes given by the * `className` option. */ color?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject); /** * (Highcharts, Highstock, Highmaps) When using dual or multiple color * axes, this number defines which colorAxis the particular series is * connected to. It refers to either the axis id or the index of the * axis in the colorAxis array, with 0 being the first. Set this option * to false to prevent a series from connecting to the default color * axis. * * Since v7.2.0 the option can also be an axis id or an axis index * instead of a boolean flag. */ colorAxis?: (boolean|number|string); /** * (Highcharts, Highstock, Gantt) When using automatic point colors * pulled from the global colors or series-specific * plotOptions.column.colors collections, this option determines whether * the chart should receive one color per series or one color per point. * * In styled mode, the `colors` or `series.colors` arrays are not * supported, and instead this option gives the points individual color * class names on the form `highcharts-color-{n}`. */ colorByPoint?: boolean; /** * (Highcharts, Highstock) Styled mode only. A specific color index to * use for the series, so its graphic representations are given the * class name `highcharts-color-{n}`. * * Since v11, CSS variables on the form `--highcharts-color-{n}` make * changing the color scheme very convenient. */ colorIndex?: number; /** * (Highcharts, Highstock, Highmaps) Determines what data value should * be used to calculate point color if `colorAxis` is used. Requires to * set `min` and `max` if some custom point property is used or if * approximation for data grouping is set to `'sum'`. */ colorKey?: string; /** * (Highcharts, Highstock, Gantt) A series specific or series type * specific color set to apply instead of the global colors when * colorByPoint is true. */ colors?: Array<(Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject)>; /** * (Highstock) Compare the values of the series against the first * non-null, non- zero value in the visible range. The y axis will show * percentage or absolute change depending on whether `compare` is set * to `"percent"` or `"value"`. When this is applied to multiple series, * it allows comparing the development of the series against each other. * Adds a `change` field to every point object. */ compare?: Highcharts.OptionsCompareValue; /** * (Highstock) When compare is `percent`, this option dictates whether * to use 0 or 100 as the base of comparison. */ compareBase?: (0|100); /** * (Highstock) Defines if comparison should start from the first point * within the visible range or should start from the first point * **before** the range. * * In other words, this flag determines if first point within the * visible range will have 0% (`compareStart=true`) or should have been * already calculated according to the previous point * (`compareStart=false`). */ compareStart?: boolean; /** * (Highcharts, Highstock, Gantt) When true, each point or column edge * is rounded to its nearest pixel in order to render sharp on screen. * In some cases, when there are a lot of densely packed columns, this * leads to visible difference in column widths or distance between * columns. In these cases, setting `crisp` to `false` may look better, * even though each column is rendered blurry. */ crisp?: boolean; /** * (Highcharts, Highstock, Gantt) When the series contains less points * than the crop threshold, all points are drawn, event if the points * fall outside the visible plot area at the current zoom. The advantage * of drawing all points (including markers and columns), is that * animation is performed on updates. On the other hand, when the series * contains more points than the crop threshold, the series data is * cropped to only contain points that fall within the plot area. The * advantage of cropping away invisible points is to increase * performance on large series. */ cropThreshold?: number; /** * (Highstock) Cumulative Sum feature replaces points' values with the * following formula: `sum of all previous points' values + current * point's value`. Works only for points in a visible range. Adds the * `cumulativeSum` field to each point object that can be accessed e.g. * in the tooltip.pointFormat. * * With `dataGrouping` enabled, default grouping approximation is set to * `sum`. */ cumulative?: boolean; /** * (Highcharts, Highstock) You can set the cursor to "pointer" if you * have click events attached to the series, to signal to the user that * the points and lines can be clicked. * * In styled mode, the series cursor can be set with the same classes as * listed under series.color. */ cursor?: (string|Highcharts.CursorValue); /** * (Highcharts, Highstock) A reserved subspace to store options and * values for customized functionality. Here you can add additional data * for your own event callbacks and formatter callbacks. */ custom?: Highcharts.Dictionary; /** * (Highcharts, Highstock) Name of the dash style to use for the graph, * or for some series types the outline of each shape. * * In styled mode, the stroke dash-array can be set with the same * classes as listed under series.color. */ dashStyle?: Highcharts.DashStyleValue; /** * (Highstock) Data grouping is the concept of sampling the data values * into larger blocks in order to ease readability and increase * performance of the JavaScript charts. Highcharts Stock by default * applies data grouping when the points become closer than a certain * pixel value, determined by the `groupPixelWidth` option. * * If data grouping is applied, the grouping information of grouped * points can be read from the Point.dataGroup. If point options other * than the data itself are set, for example `name` or `color` or custom * properties, the grouping logic doesn't know how to group it. In this * case the options of the first point instance are copied over to the * group point. This can be altered through a custom `approximation` * callback function. */ dataGrouping?: Highcharts.DataGroupingOptionsObject; /** * (Highcharts, Highstock) Extended data labels for range series types. * Range series data labels have no `x` and `y` options. Instead, they * have `xLow`, `xHigh`, `yLow` and `yHigh` options to allow the higher * and lower data label sets individually. */ dataLabels?: (Highcharts.SeriesAreaRangeDataLabelsOptionsObject|Array); /** * (Highcharts, Highstock) Options for the series data sorting. */ dataSorting?: (Highcharts.DataSortingOptionsObject|Highcharts.PlotColumnrangeDataSortingOptions); /** * (Highcharts) Depth of the columns in a 3D column chart. */ depth?: number; /** * (Highcharts, Highstock) A description of the series to add to the * screen reader information about the series. */ description?: string; /** * (Highcharts, Highstock) The draggable-points module allows points to * be moved around or modified in the chart. In addition to the options * mentioned under the `dragDrop` API structure, the module fires three * events, point.dragStart, point.drag and point.drop. */ dragDrop?: Highcharts.SeriesDragDropOptionsObject; /** * (Highcharts) 3D columns only. The color of the edges. Similar to * `borderColor`, except it defaults to the same color as the column. */ edgeColor?: Highcharts.ColorString; /** * (Highcharts) 3D columns only. The width of the colored edges. */ edgeWidth?: number; /** * (Highcharts, Highstock) Enable or disable the mouse tracking for a * specific series. This includes point tooltips and click events on * graphs and points. For large datasets it improves performance. */ enableMouseTracking?: boolean; /** * (Highcharts, Highstock) General event handlers for the series items. * These event hooks can also be attached to the series at run time * using the `Highcharts.addEvent` function. */ events?: Highcharts.SeriesEventsOptionsObject; /** * (Highcharts, Highstock) Determines whether the series should look for * the nearest point in both dimensions or just the x-dimension when * hovering the series. Defaults to `'xy'` for scatter series and `'x'` * for most other series. If the data has duplicate x-values, it is * recommended to set this to `'xy'` to allow hovering over all points. * * Applies only to series types using nearest neighbor search (not * direct hover) for tooltip. */ findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue; /** * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the * total chart width or only the zoomed area when zooming in on parts of * the X axis. By default, the Y axis adjusts to the min and max of the * visible data. Cartesian series only. */ getExtremesFromAll?: boolean; /** * (Highcharts, Highstock, Gantt) Whether to group non-stacked columns * or to let them render independent of each other. Non-grouped columns * will be laid out individually and overlap each other. */ grouping?: boolean; /** * (Highcharts, Highstock, Gantt) Padding between each value groups, in * x axis units. */ groupPadding?: number; /** * (Highcharts) The spacing between columns on the Z Axis in a 3D chart. */ groupZPadding?: number; /** * (Highcharts, Highstock) Highlight only the hovered point and fade the * remaining points. * * Scatter-type series require enabling the 'inactive' marker state and * adjusting opacity. Note that this approach could affect performance * with large datasets. */ inactiveOtherPoints?: boolean; /** * (Highcharts, Highstock) When set to `false` will prevent the series * data from being included in any form of data export. * * Since version 6.0.0 until 7.1.0 the option was existing undocumented * as `includeInCSVExport`. */ includeInDataExport?: boolean; /** * (Highcharts, Highstock) An array specifying which option maps to * which key in the data point array. This makes it convenient to work * with unstructured data arrays from different sources. */ keys?: Array; /** * (Highcharts, Highstock, Gantt) Series labels are placed as close to * the series as possible in a natural way, seeking to avoid other * series. The goal of this feature is to make the chart more easily * readable, like if a human designer placed the labels in the optimal * position. * * The series labels currently work with series types having a `graph` * or an `area`. */ label?: Highcharts.SeriesLabelOptionsObject; /** * (Highstock) The line marks the last price from all points. */ lastPrice?: Highcharts.SeriesLastPriceOptionsObject; /** * (Highstock) The line marks the last price from visible range of * points. */ lastVisiblePrice?: Highcharts.SeriesLastVisiblePriceOptionsObject; /** * (Highcharts, Highstock) What type of legend symbol to render for this * series. Can be one of `areaMarker`, `lineMarker` or `rectangle`. */ legendSymbol?: Highcharts.OptionsLegendSymbolValue; /** * (Highcharts, Highstock, Gantt) The id of another series to link to. * Additionally, the value can be ":previous" to link to the previous * series. When two series are linked, only the first one appears in the * legend. Toggling the visibility of this also toggles the linked * series. * * If master series uses data sorting and linked series does not have * its own sorting definition, the linked series will be sorted in the * same order as the master one. */ linkedTo?: string; /** * (Highcharts, Highstock, Gantt) The maximum allowed pixel width for a * column, translated to the height of a bar in a bar chart. This * prevents the columns from becoming too wide when there is a small * number of points in the chart. */ maxPointWidth?: number; /** * (Highcharts, Highstock, Gantt) The minimal height for a column or * width for a bar. By default, 0 values are not shown. To visualize a 0 * (or close to zero) point, set the minimal point length to a pixel * value like 3\. In stacked column charts, minPointLength might not be * respected for tightly packed values. */ minPointLength?: number; /** * (Highstock) Options for the corresponding navigator series if * `showInNavigator` is `true` for this series. Available options are * the same as any series, documented at plotOptions and series. * * These options are merged with options in navigator.series, and will * take precedence if the same option is defined both places. */ navigatorOptions?: Highcharts.PlotSeriesOptions; /** * (Highcharts, Highstock) Options for the _Series on point_ feature. * Only `pie` and `sunburst` series are supported at this moment. */ onPoint?: (object|Highcharts.PlotColumnrangeOnPointOptions); /** * (Highcharts, Highstock) Opacity of a series parts: line, fill (e.g. * area) and dataLabels. */ opacity?: number; /** * (Highcharts, Highstock) Properties for each single point. */ point?: Highcharts.PlotSeriesPointOptions; /** * (Highcharts, Highstock) Same as * accessibility.point.descriptionFormat, but for an individual series. * Overrides the chart wide configuration. */ pointDescriptionFormat?: Function; /** * (Highcharts, Highstock) Same as * accessibility.series.descriptionFormatter, but for an individual * series. Overrides the chart wide configuration. */ pointDescriptionFormatter?: Function; /** * (Highcharts, Highstock, Gantt) If no x values are given for the * points in a series, `pointInterval` defines the interval of the x * values. For example, if a series contains one value every decade * starting from year 0, set `pointInterval` to `10`. In true `datetime` * axes, the `pointInterval` is set in milliseconds. * * It can be also be combined with `pointIntervalUnit` to draw irregular * time intervals. * * If combined with `relativeXValue`, an x value can be set on each * point, and the `pointInterval` is added x times to the `pointStart` * setting. * * Please note that this options applies to the _series data_, not the * interval of the axis ticks, which is independent. */ pointInterval?: number; /** * (Highcharts, Highstock, Gantt) On datetime series, this allows for * setting the pointInterval to irregular time units, `day`, `month` and * `year`. A day is usually the same as 24 hours, but * `pointIntervalUnit` also takes the DST crossover into consideration * when dealing with local time. Combine this option with * `pointInterval` to draw weeks, quarters, 6 months, 10 years etc. * * Please note that this options applies to the _series data_, not the * interval of the axis ticks, which is independent. */ pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue; /** * (Highcharts, Highstock, Gantt) Padding between each column or bar, in * x axis units. */ pointPadding?: number; /** * (Highcharts, Highstock, Gantt) Possible values: `"on"`, `"between"`, * `number`. * * In a column chart, when pointPlacement is `"on"`, the point will not * create any padding of the X axis. In a polar column chart this means * that the first column points directly north. If the pointPlacement is * `"between"`, the columns will be laid out between ticks. This is * useful for example for visualising an amount between two points in * time or in a certain sector of a polar chart. * * Since Highcharts 3.0.2, the point placement can also be numeric, * where 0 is on the axis value, -0.5 is between this value and the * previous, and 0.5 is between this value and the next. Unlike the * textual options, numeric point placement options won't affect axis * padding. * * Note that pointPlacement needs a pointRange to work. For column * series this is computed, but for line-type series it needs to be set. * * For the `xrange` series type and gantt charts, if the Y axis is a * category axis, the `pointPlacement` applies to the Y axis rather than * the (typically datetime) X axis. * * Defaults to `undefined` in cartesian charts, `"between"` in polar * charts. */ pointPlacement?: (number|string); /** * (Highcharts, Highstock, Gantt) The X axis range that each point is * valid for. This determines the width of the column. On a categorized * axis, the range will be 1 by default (one category unit). On linear * and datetime axes, the range will be computed as the distance between * the two closest data points. * * The default `null` means it is computed automatically, but this * option can be used to override the automatic value. * * This option is set by default to 1 if data sorting is enabled. */ pointRange?: (number|null); /** * (Highcharts, Highstock, Gantt) If no x values are given for the * points in a series, pointStart defines on what value to start. For * example, if a series contains one yearly value starting from 1945, * set pointStart to 1945. * * If combined with `relativeXValue`, an x value can be set on each * point. The x value from the point options is multiplied by * `pointInterval` and added to `pointStart` to produce a modified x * value. */ pointStart?: number; /** * (Highcharts, Highstock, Gantt) A pixel value specifying a fixed width * for each column or bar point. When set to `undefined`, the width is * calculated from the `pointPadding` and `groupPadding`. The width * effects the dimension that is not based on the point value. For * column series it is the horizontal length and for bar series it is * the vertical length. */ pointWidth?: number; /** * (Highcharts, Highstock) When true, X values in the data set are * relative to the current `pointStart`, `pointInterval` and * `pointIntervalUnit` settings. This allows compression of the data for * datasets with irregular X values. * * The real X values are computed on the formula `f(x) = ax + b`, where * `a` is the `pointInterval` (optionally with a time unit given by * `pointIntervalUnit`), and `b` is the `pointStart`. */ relativeXValue?: boolean; /** * (Highcharts, Highstock) Whether to select the series initially. If * `showCheckbox` is true, the checkbox next to the series name in the * legend will be checked for a selected series. */ selected?: boolean; /** * (Highcharts, Highstock) Whether to apply a drop shadow to the graph * line. Since 2.3 the shadow can be an object configuration containing * `color`, `offsetX`, `offsetY`, `opacity` and `width`. * * Note that in some cases, like stacked columns or other dense layouts, * the series may cast shadows on each other. In that case, the * `chart.seriesGroupShadow` allows applying a common drop shadow to the * whole series group. */ shadow?: (boolean|Highcharts.ShadowOptionsObject); /** * (Highcharts, Highstock) If true, a checkbox is displayed next to the * legend item to allow selecting the series. The state of the checkbox * is determined by the `selected` option. */ showCheckbox?: boolean; /** * (Highcharts, Highstock) Whether to display this particular series or * series type in the legend. Standalone series are shown in legend by * default, and linked series are not. Since v7.2.0 it is possible to * show series that use colorAxis by setting this option to `true`. */ showInLegend?: boolean; /** * (Highstock) Whether or not to show the series in the navigator. Takes * precedence over navigator.baseSeries if defined. */ showInNavigator?: boolean; /** * (Highcharts, Highstock) If set to `true`, the accessibility module * will skip past the points in this series for keyboard navigation. */ skipKeyboardNavigation?: boolean; /** * (Highcharts, Highstock) Sonification/audio chart options for a * series. */ sonification?: Highcharts.SeriesSonificationOptions; states?: Highcharts.SeriesStatesOptionsObject; /** * (Highcharts, Highstock) Sticky tracking of mouse events. When true, * the `mouseOut` event on a series isn't triggered until the mouse * moves over another series, or out of the plot area. When false, the * `mouseOut` event on a series is triggered when the mouse leaves the * area around the series' graph or markers. This also implies the * tooltip when not shared. When `stickyTracking` is false and * `tooltip.shared` is false, the tooltip will be hidden when moving the * mouse between series. Defaults to true for line and area type series, * but to false for columns, pies etc. * * **Note:** The boost module will force this option because of * technical limitations. */ stickyTracking?: boolean; /** * (Highcharts, Highstock) A configuration object for the tooltip * rendering of each single series. Properties are inherited from * tooltip, but only the following properties can be defined on a series * level. */ tooltip?: Highcharts.SeriesTooltipOptionsObject; /** * (Highcharts, Highstock, Gantt) When a series contains a data array * that is longer than this, only one dimensional arrays of numbers, or * two dimensional arrays with x and y values are allowed. Also, only * the first point is tested, and the rest are assumed to be the same * format. This saves expensive data checking and indexing in long * series. Set it to `0` disable. * * Note: In boost mode turbo threshold is forced. Only array of numbers * or two dimensional arrays are allowed. */ turboThreshold?: number; /** * (Highcharts, Highstock) Set the initial visibility of the series. */ visible?: boolean; /** * (Highcharts, Highstock) Defines the Axis on which the zones are * applied. */ zoneAxis?: string; /** * (Highcharts, Highstock) An array defining zones within a series. * Zones can be applied to the X axis, Y axis or Z axis for bubbles, * according to the `zoneAxis` option. The zone definitions have to be * in ascending order regarding to the value. * * In styled mode, the color zones are styled with the * `.highcharts-zone-{n}` class, or custom classed from the `className` * option (view live demo). */ zones?: Array; } /** * (Highcharts, Highstock) A `columnrange` series. If the type option is not * specified, it is inherited from chart.type. * * In TypeScript the type option must always be set. * * Configuration options for the series are given in three levels: * * 1. Options for all series in a chart are defined in the * plotOptions.series object. * * 2. Options for all `columnrange` series are defined in * plotOptions.columnrange. * * 3. Options for one single series are given in the series instance array. * (see online documentation for example) * * You have to extend the `SeriesColumnrangeOptions` via an interface to * allow custom properties: ``` declare interface SeriesColumnrangeOptions { * customProperty: string; } * */ interface SeriesColumnrangeOptions extends Highcharts.PlotColumnrangeOptions, Highcharts.SeriesOptions { /** * (Highcharts, Highstock) An array of data points for the series. For * the `columnrange` series type, points can be given in the following * ways: * * 1. An array of arrays with 3 or 2 values. In this case, the values * correspond to `x,low,high`. If the first value is a string, it is * applied as the name of the point, and the `x` value is inferred. The * `x` value can also be omitted, in which case the inner arrays should * be of length 2\. Then the `x` value is automatically calculated, * either starting at 0 and incremented by 1, or from `pointStart` and * `pointInterval` given in the series options. (see online * documentation for example) * * 2. An array of objects with named values. The following snippet shows * only a few settings, see the complete options set below. If the total * number of data points exceeds the series' turboThreshold, this option * is not available. (see online documentation for example) */ data?: Array<([(number|string), number]|[(number|string), number, number]|Highcharts.PointOptionsObject)>; /** * Not available */ dataParser?: undefined; /** * Not available */ dataURL?: undefined; /** * Not available */ stack?: undefined; /** * (Highcharts, Highstock, Highmaps, Gantt) This property is only in * TypeScript non-optional and might be `undefined` in series objects * from unknown sources. */ type: "columnrange"; } }